2018-03-04, 11:25 AM
(This post was last modified: 2018-03-09, 11:55 PM by MisterAcoustic.
Edit Reason: Minor Clarification
)
I wanted to add that I believe this is a driver issue, so you might try looking for an older version - things have changed, but I _think_ it's the unsupported driver at the bottom of this page:
http://www.ftdichip.com/Drivers/VCP.htm
That page now claims that support for their devices are now supported directly by the kernel. So maybe we should uninstall the driver instead.
Lastly, there could be something weird going on with Repetier Host - so you could try Cura instead.
Stan
EDIT: A belated edit on this to mention that the above really applies to old Printrboard clone hardware. The symptoms are so similar though, that I'm wondering if it's not a general problem.
http://www.ftdichip.com/Drivers/VCP.htm
That page now claims that support for their devices are now supported directly by the kernel. So maybe we should uninstall the driver instead.
Lastly, there could be something weird going on with Repetier Host - so you could try Cura instead.
Stan
EDIT: A belated edit on this to mention that the above really applies to old Printrboard clone hardware. The symptoms are so similar though, that I'm wondering if it's not a general problem.