OneUp V2 Build Log.

[mr_intensity]

All Together Now

Just add some tape...

NOTE:  This post, and the next several posts, took place at Friday night's EAA Build night.

As promised, here is a close-up of the screw-with-washer.  Even close up, the washer looks almost invisible.

   

Anyway, I wanted some more support for the thermistor, as something tugging on that wire may break the head off, or something.  The original pieces parts were shrink-wrapped together, near the heads.

   

I did not have shrink wrap handy, but I did have Blue Painter's Tape (BPT), which will show up more prominently in the next entry.

   

So, I taped the thermistor wires to the heater wires.

Now, let's see if we can get this thing working with a real thermistor.