2018-01-12, 06:18 PM
Fusion360 is free for personal/hobby use.
There's also FreeCAD, OpenSCAD, and a number of other free/cheap products that may be better suited for a hobby/individual budget and that will run under *nix. Unfortunately I haven't kept up with the Mac Market for quite a few years and don't know what's available there.
I mostly use OpenSCAD and occasionally SketchUp, Fusion360 is on my to-do list and I have it installed on this machine. I need something that'll work with my Maslow CNC and want a step up from Inkscape. I'll need to build a bunch of cabinets and storage, turning one end of a barn (about 20x24') into a woodshop, slowly...
Kirk
There's also FreeCAD, OpenSCAD, and a number of other free/cheap products that may be better suited for a hobby/individual budget and that will run under *nix. Unfortunately I haven't kept up with the Mac Market for quite a few years and don't know what's available there.
I mostly use OpenSCAD and occasionally SketchUp, Fusion360 is on my to-do list and I have it installed on this machine. I need something that'll work with my Maslow CNC and want a step up from Inkscape. I'll need to build a bunch of cabinets and storage, turning one end of a barn (about 20x24') into a woodshop, slowly...
Kirk
------
KS Printrbot Plus, modified
Thingybot Delta
QU-BD One Up (parts, bad motor)
QU-BD RPM (unassembled parts, no spindle)
Maslow CNC V4.1 (4'x8' belt drive)
Zenbot Mini (6"x8", grbl_ESP32)
SainSmart 3018Pro, 4030V2, 4040 Pro
Ender 3 Pro, K1C
BobsCNC Revolution (FluidNC)
Eggbot
KS Printrbot Plus, modified
Thingybot Delta
QU-BD One Up (parts, bad motor)
QU-BD RPM (unassembled parts, no spindle)
Maslow CNC V4.1 (4'x8' belt drive)
Zenbot Mini (6"x8", grbl_ESP32)
SainSmart 3018Pro, 4030V2, 4040 Pro
Ender 3 Pro, K1C
BobsCNC Revolution (FluidNC)
Eggbot